Loading... Please wait...

d&b audiotechnik D6

d&b audiotechnik See All d&b audiotechnik Products
Image 1

CLICK TO ENLARGE

  • Image 1
  • Image 2

Product Overview

The d&b D6 amplifier is a dual channel amplifier incorporating digital signal processors (DSP) to provide loudspeaker specific configurations and functions.

It is designed for use with d&b loudspeakers except the 2-Way Active mode and the B2-SUB configurations, has both digital and analog signal inputs as well as link outputs, remote control and monitoring capabilities and sophisticated protection circuits. It utilizes a switch mode power supply with PFC suitable for mains supply voltages 100 V / 115 V / 200 V / 230 V, 50 – 60 Hz and has a temperature and signal controlled fan to cool the internal assemblies. It is specifically designed to deliver medium power into low impedance loads between 4 and 16 ohms. A user definable 4-band parametric equalizer and signal delay capability of up to 340 ms are incorporated and can be applied independently to each channel. A signal generator offering pink noise or sine wave program is also incorporated.

Applications

Features

The D6 uses its Load monitoring and System check functions to ascertain the status of the loudspeaker impedance. d&b System check verifies that the system performs within a predefined condition, whilst d&b Load monitoring enables an automatic and continuous impedance monitoring.

Both can determine the status of an LF or HF driver in systems with multiple elements, even if these are crossed over passively. All of these functions and parameters can be easily accessed and controlled via the LCD in conjunction with the digital rotary encoder or through the d&b Remote network.

Specifications

  • D6 data (linear setting with subsonic filter)  
    Rated output power (THD+N < 0.1%) 2 x 350 W into 8 Ω, both channels are driven
    2 x 600 W into 4 Ω, both channels are driven
    S/N ratio (unweighted, RMS) > 110 dBr
  • D6 Connectors  
    INPUT/LINK ANALOG A/B 3 pin XLR female/male
    INPUT/LINK DIGITAL AES/EBU 3 pin XLR female/male
    Sampling rate 48 kHz / 96 kHz
    OUT CHANNEL A/B NL4
    REMOTE 2 x RJ 45 parallel
    SERVICE USB Type B
  • D6 Digital Signal Processing  
    Sampling rate 96 kHz / 27 Bit ADC / 24 Bit DAC
    Basic delay / latency analog input 0.3 ms
  • D6 Power supply  
    Autosensing switch mode power supply for 100/115/200/230V, 50 - 60 Hz
    Mains connector PowerCon®
  • D6 Remote network  
    Remote network CAN-Bus
  • D6 Dimensions, weight  
    Height x width x depth 2 RU x 19" x 353 mm / 13.9"
    Weight 8 kg / 17.6 lb

Product Downloads

  • D6 d6 hardware manual V1.7 PDF 0.5 MB
  • D6 d6 software manual v1.1 PDF 0.4 MB
  • D6 Ti315 aes/ebu input wiring PDF 0.4 MB
  • D6 Ti330 cardioid subwoofer array (csa) PDF 0.3 MB
  • D6 Ti312 d&b remote network PDF 0.9 MB
  • D6 Ti360 system check PDF 0.1 MB
  • D6 Ti391 effective use of R1 PDF 0.2 MB
  • D6 r1 software v1.8.5 ZIP 7.7 MB
  • D6 r1 example projects ZIP 0.0 MB

Videos

Take The Next Step

Enquire about this product

Product Categories

*Prices are in AUD, include GST and are subject to change. Please call National Audio for pricing and availability on the D6.