Cloud MPA240
Product Overview
The increase in demand for higher quality mixed impedance output amplifiers for general installer applications has instigated the launch of Cloud Electronics new MPA Series. 6 line + 4 microphone inputs into a single zone with configurable 25/70 or 100V internal transformer plus the industry standard wall mount remote controllers (RL1 & RSL6) make the MPA Series the most flexible and reliable installer amps in the market.
Applications
The Cloud MPA Series is a range of mixer-amplifiers with applications in Licensed, Retail, Leisure and similar venues.
Three models are available to suit different output power requirements (60, 120 or 240 watts); otherwise all models have identical facilities.
The mixer-amplifiers have inputs for six stereo line signals and four microphone signals. Front panel controls are provided for music source selection, music level and microphone levels. All pre-set controls are located on the rear panel with further configuration jumpers mounted on the main PCB.
A remote level control or combined level control/music source selector can be wired to the unit for installations that require remote control.
Features
- 6 line inputs, stereo inputs summed to mono
- Line inputs via RCA phonos with input gain controls adjacent to connectors
- Source select via front panel rotary selector or remote via RSL6
- Line input level via front panel control or remotely via RL1 or RSL6
- Line 6 priority selectable by internal jumper, release time 3s/6s/12s selectable by internal jumper
- Music EQ by tamperproof LF and HF presets on rear panel
- 4 Mic inputs, low impedance balanced via phoenix style connectors
- Microphone EQ by tamperpoof LF and HF presets on rear panel
- 100Hz High Pass dedicated filter on Mic inputs
- Phantom power selected by internal jumper for each microphone
- Limiter dedicated to microphone inputs
- Mic 1 has access triggered priority over Mics 2-4
- All Mics have VOX priority over music signals, providing 30dB of attenuation
- Integrated chime triggered by access control of Mic 1
- Compatible with EQ Cards
- Remote Music Mute configurable for NO or NC operation
- Overall "Peak Limiter" with LED indication on front panel
Accessories
- RL-1 Remote Level Control
- RSL-6 Remote Music Source Selector
- XLR-F1 Female XLR Connector
- XLR-M1 Male XLR Connector
Specifications
Full specifications are available under the Downloads tab above
Line Inputs
- Frequency Response 20Hz +0dB -1dB, 63Hz -3dB
3rd order filter, selectable by jumper
20kHz -1dB low impedance output
20kHz -2dB 100/70/25V line outputs
- Distortion <0.03% low impedance output
<0.04% 25/70/100V outputs
@ 1kHz 1dB below full power
80kHz bandwidth
- Sensitivity 195mV (-12dBu) to 2V (+8dBu)
- Input Gain Control 20dB range
- Input Impedance 47kΩ
- Headroom >-20dB
- Noise -90dBr 22kHz bandwidth, 0dB input, Relative to full power output.
- Equalisation HF: ±10dB/10kHz, LF: ±10dB/50Hz
Microphone Inputs
- Frequency Response 100Hz / -3dB(3rd order filter)
20kHz +0, -1dB low impedance output
20kHz -2dB 100/70/25V line outputs
- Distortion <0.03% @ 1kHz -1dB below full power
80kHz bandwidth
- Gain Range 10dB - 50dB
- Input Impedance >2kΩ (balanced)
- Phantom Power +15V (PCB jumper for on/off)
- Headroom >20dB
- Input Noise -127dB EIN 22Hz - 22kHz (150Ω)
- Equalisation HF: ±10dB/5kHz, LF: ±10dB/100Hz
Power Output
- MPA240 240Watts, any output @1kHz, <0.07%THD+N
Product Downloads
MPA240 Data Sheet PDF 0.4 MB
MPA240 Manual PDF 1.1 MB
MPA240 Jumper Settings PDF 0.0 MB
MPA240 MPA240 Front JPG 0.6 MB
MPA240 MPA240 Back JPG 0.7 MB
Videos
*Prices are in AUD, include GST and are subject to change. Please call National Audio for pricing and availability on the MPA240.