Cloud MPA60
Product Overview
The increase in demand for higher quality mixed impedance output amplifiers for general installer applications has instigated the launch of Cloud Electronics new MPA Series. 6 line + 4 microphone inputs into a single zone with configurable 25/70 or 100V internal transformer plus the industry standard wall mount remote controllers (RL1 & RSL6) make the MPA Series the most flexible and reliable installer amps in the market.
Applications
The Cloud MPA Series is a range of mixer-amplifiers with applications in Licensed, Retail, Leisure and similar venues.
Three models are available to suit different output power requirements (60, 120 or 240 watts); otherwise all models have identical facilities.
The mixer-amplifiers have inputs for six stereo line signals and four microphone signals. Front panel controls are provided for music source selection, music level and microphone levels. All pre-set controls are located on the rear panel with further configuration jumpers mounted on the main PCB.
A remote level control or combined level control/music source selector can be wired to the unit for installations that require remote control.
Features
- 6 line inputs, stereo inputs summed to mono
- Line inputs via RCA phonos with input gain controls adjacent to connectors
- Source select via front panel rotary selector or remote via RSL6
- Line input level via front panel control or remotely via RL1 or RSL6
- Line 6 priority selectable by internal jumper, release time 3s/6s/12s selectable by internal jumper
- Music EQ by tamperproof LF and HF presets on rear panel
- 4 Mic inputs, low impedance balanced via phoenix style connectors
- Microphone EQ by tamperpoof LF and HF presets on rear panel
- 100Hz High Pass dedicated filter on Mic inputs
- Phantom power selected by internal jumper for each microphone
- Limiter dedicated to microphone inputs
- Mic 1 has access triggered priority over Mics 2-4
- All Mics have VOX priority over music signals, providing 30dB of attenuation
- Integrated chime triggered by access control of Mic 1
- Compatible with EQ Cards
- Remote Music Mute configurable for NO or NC operation
- Overall "Peak Limiter" with LED indication on front panel
Accessories
- RL-1 Remote Level Control
- RSL-6 Remote Music Source Selector
- XLR-F1 Female XLR Connector
- XLR-M1 Male XLR Connector
Specifications
Full specifications are available under the Downloads tab above
Line Inputs
- Frequency Response 20Hz +0dB -1dB, 63Hz -3dB
3rd order filter, selectable by jumper
20kHz -1dB low impedance output
20kHz -2dB 100/70/25V line outputs
- Distortion <0.03% low impedance output
<0.04% 25/70/100V outputs
@ 1kHz 1dB below full power
80kHz bandwidth
- Sensitivity 195mV (-12dBu) to 2V (+8dBu)
- Input Gain Control 20dB range
- Input Impedance 47kΩ
- Headroom >-20dB
- Noise -90dBr 22kHz bandwidth, 0dB input, Relative to full power output.
- Equalisation HF: ±10dB/10kHz, LF: ±10dB/50Hz
Microphone Inputs
- Frequency Response 100Hz / -3dB(3rd order filter)
20kHz +0, -1dB low impedance output
20kHz -2dB 100/70/25V line outputs
- Distortion <0.03% @ 1kHz -1dB below full power
80kHz bandwidth
- Gain Range 10dB - 50dB
- Input Impedance >2kΩ (balanced)
- Phantom Power +15V (PCB jumper for on/off)
- Headroom >20dB
- Input Noise -127dB EIN 22Hz - 22kHz (150Ω)
- Equalisation HF: ±10dB/5kHz, LF: ±10dB/100Hz
Power Output
- MPA60 60Watts, any output @1kHz, <0.07%THD+N
Videos
*Prices are in AUD, include GST and are subject to change. Please call National Audio for pricing and availability on the MPA60.