Full specifications are available under the Downloads tab above

Paging Zones:

• Up to sixteen Zones are available in an installation. All PMs are fitted with sixteen access terminal so that any PM can be used as the mixer interface in a multiple PM system.
• PM4: Four zones
           Can interface upto sixteen zones from linked PMs
• PM8: Eight zones
           Can interface upto sixteen zones from linked PMs
• PM12: Twelve zones
              Can interface upto sixteen zones from linked PMs
• PM16: Sixteen Zones
  
  

Features:

• Pre announcement chime: Choice of four chimes selected by internal jumper
                                           Chime can be set off/on by internal jumper
                                           Internal sounder
                                           Can be set off/on by internal jumper
                                           Chime Level control preset
• Interconnectable: PMs of any combination of zone sizes can be daisy chained
                              using CAT5 cable
• Bank shift: A PMs pageable zones can be shifted around the
                    available sixteen zones
                    Set by internal jumpers
• Zone barring: A PM can be barred from accessing zones.
                        Set by internal jumper
• Group lock: The group buttons can be locked to prevent tampering
                      Set by internal jumper
• Priority: A PM can be set to high priority enabling it to interrupt a
                low priority PM
                Set by internal jumper
• Microphone level: Preset allows a PMs level to be trimmed
• Auto zone reset: Allows a zone selection to be retained after a page
                            Set by internal jumper

Performance:

• Directivity: Unidirectional, cardioid pattern
• Microphone element: Electret condensor
• Sensitivity (1KHz): 68 dB ± 3 dB
                                 ( 0 dB=1V/ μbar 1KHz indicated by open circuit)
• Frequency response: 80 Hz ~ 16,000Hz
• Internal compressor

Controls - Elastomer push buttonswith SMDtact switches:

• Zone: Select a zone for paging
• Zone Light: Indicates a zones selection
• Clear: Clear all selected zones
• Talk: Open a call to selected zones
• Call all: Open a call to all zones available to the PM
• Group: Four group buttons give programmable zone selection
• Busy Light: Indicates when paging system is in use

Connections:

• Analogue: Use with traditional short to groundmixers
• Microphone: Internal three poles screw terminal
                      Hot, cold and screen
• Access: Internal sixteen poles screw terminal allows any model of PM to
               interface the full sixteen zones available to an installation
• Digital: Use to interconnect PMs or interface to digital enabled mixers
               such as the Cloud DCM-1
• RJ45 OUT: Carries switching data and transmits analogue audio to the next
                   daisy chained unit or mixer
                   Also receives power when connected to a mixer
• RJ45 IN: Carries switching data and receives analogue audio from other PMs
• Power: Internal two poles screw terminal
             Power from mixer via access cable
• 2.1mm concentric power jack: Use an external PSU
• RJ45 OUT socket: Power from mixer via CAT5 cable

Power - Voltage:

• Internal screw terminal: 12 -24VDC
• External 2.1mm jack: 12 - 24VDC, 9-17VAC
• RJ45 OUT socket: 12 -15VDC from mixer

Power - Consumption:

• PM4: 55mA
• PM8: 61mA
• PM12: 67mA
• PM16: 73mA

Physical - Dimension:

• Width: 245mm
• Height (not including gooseneck): 65mm
• Depth: 170mm
• Gooseneck: 300mm
• Weight: 1.2kg

Physical - Finish:

• Cabinet: Black rubberised ABS
• Base: Slate grey painted steel
• Gooseneck: Black painted brass
• Mounting: Rubber feet

Cables - Analogue:

• Audio: Twin core screened (Microphone cable)
• Access: Screened multicore
               1 core per zone, 1 core for ground,
               plus 1 core for power if powered by mixer
• Maximum length: 100m

Cables - Digital:

• Type: Cat 5
• Maximum length: 1km total
• Maximum connected PMS: 32