Loading... Please wait...

ASL TS99

RRP $799.00
ASL See All ASL Products
Image 1

CLICK TO ENLARGE

  • Image 1

Product Overview

The ASL Cue Light system consists of one or more TS 120 12-channel Master Stations, the required number of TS 10 Cue Light Receivers, and the optional TS 99 Preset Control unit. Connections between Master Stations and Receivers utilize standard microphone cables with XLR-3 connectors.

Two or more TS 120 Master Stations can be interlinked using the D9 connectors on the rear panel. Linking two units, for example, creates a 24-channel cue light system. Up to twelve units may be linked in this manner, for a maximum of 144 channels. Regardless of how many units are linked, only one TS 99 Preset Controller is required.

The TS99 Preset Control is powered by the TS120 via an interconnecting cable. It can hold a maximum of 100 presets, stored in non volatile memory. Each preset is a selection out of maximum 144 channels, obtained when twelve TS120 master stations are linked (see above ‘Linking two ore more TS120 Master Stations’). Each preset has its page number, which is selected and displayed in the LED screen by using the 'up' and 'down' push buttons.

Applications

Features

With the TS-99 unit the presets of the TS-120’s can be programmed.

  • Select the requested preset number on the TS-99 with the “left” and “right” buttons.
  • Preview the current settings with the “preview” button, all selected channels will be shown in green flashing LED’s
  • To change the setting, press “program”. All selected channels will be shown in green flashing LED’s, you may change the setting by pushing the GO buttons of the TS-120.

 After completing your selection of the preset push and hold “Store” until the TS-120 returns to its normal state.

Using the presets:

  • The active preset number is indicated by the blinking dot next to the preset number. An active preset must be finished (sent ATTN and sent GO) before the next preset maybe selected.
  • On the active preset activate ATTN by pushing the ATTN button. All programmed channels will go to ATTN mode.
  • Then push the GO button on the desired moment and all channels will switch from ATTN to GO (red to green).

Now you are allowed to switch to the next preset number where you start from pushing the ATTN button again

Specifications

Product Downloads

Videos

Take The Next Step

Enquire about this product

Product Categories

*Prices are in AUD, include GST and are subject to change. Please call National Audio for pricing and availability on the TS99.